Interactive Design of Monitoring Programmes for the Geological Storage of CO2
The Monitoring Selection Tool has been created to identify and prioritise techniques that could form part of a monitoring programme. The tool will help users to design a monitoring programme to monitor a CO2 storage project during all stages from site characterisation through to post-injection. It aims to select and rate monitoring techniques, based on a user-defined project scenario, and to identify the most appropriate techniques that should be evaluated for a given stage of project development. The tool should not be considered as being prescriptive but rather as a decision support tool that encourages evaluation of techniques by providing information on their applicability for a defined storage scenario. It is flexible enough to help design monitoring programmes for different storage scenarios and situations.
The Monitoring Selection Tool contains 40 monitoring techniques. For each technique a full description is available including illustrations and indications of suitability. If appropriate, there are details of case studies where the techniques have been applied and a bibliography of relevant references is included. As well as being a tool to help design monitoring protocols, it is also an extensive reference source on monitoring techniques.
All content has been reviewed and additional material added during the update to version 2.2.2, released in October 2010. Layout changes to fit the new IEAGHG website have been implemented in version 2.3.1.
Note that metric units are used throughout this tool, unless clearly stated.
If this is your first visit we recommend that you look at the background information to guide you through the process. You do not need to register to use this website. However, we recommend that you register as soon as possible, as this will allow you to save your outputs and revisit or revise them in the future. To display these webpages properly, it is recommended that you do not use the forward and back buttons to navigate the website. In addition, browser caching may cause some display problems. Please refresh the browser window to rectify these. Use of the "Print Friendly" button requires popups to be enabled. If you are using Internet Explorer 10, please view in compatibility mode.
The Monitoring Selection Tool was developed and designed at the British Geological Survey under the CO2 Capture & Storage Research Theme. If you have feedback or information to add to this site, please let us know. Please take part in our feedback survey to help us update the next version of the tool.
We are grateful to the members of the IEAGHG Monitoring Network for their constructive feedback during tool development.
The development of the Monitoring Selection Tool has been sponsored by the IEA Greenhouse Gas R&D Programme. The views and opinions expressed herein do not necessarily reflect those of the IEA Greenhouse Gas R&D Programme, its members, the International Energy Agency, British Geological Survey (BGS), nor any employee or persons acting on behalf of any of them. In addition, none of these make any warranty, express or implied, assumes any liability or responsibility for the accuracy, completeness or usefulness of any information, apparatus, product or process disclosed or represents that its use would not infringe privately owned rights, including any party’s intellectual property rights. Reference herein to any commercial product, process, service or trade name, trade mark or manufacturer does not necessarily constitute or imply an endorsement, recommendation or any favouring of such products.